Submit a Request

Bleachers

The Bleacherguys modular bleacher systems are designed for installation based on the space available and the seating required. Our bleacher frames come in 3,4,5,10,15 and 20 tier design. They are available in various lengths and can be installed on elevated superstructures, as more seating is required.

This allows for construction of multi-tiered bleacher systems that make maximum use of the space available and are built to meet and exceed all Canadian Building Code requirements.

All steel understructure is Hot-dip Galvanized after fabrication. Stairs and ramps can also be installed on your bleacher system to allow easy access for everyone.

Options
3 Row  
3-5 Row -
4 Row  
3-5 Row -
5 Row  
3-5 Row -

3-5 Row

Our standard 3-5 row bleachers offer durable seating with low maintenance. Constructed from our Hot-dip Galvanized steel under structure, clear anodized seat planking, mill finished double footboard planking and 100mm riser restriction options. Exceeding both the Ontario Building Code and the National Building Code, our bleachers put fourth a competitive product that is available in various lengths.

For sizing options contact us!

×
2 Row  
Tip & Roll -
3 Row  
Tip & Roll -
4 Row  
Tip & Roll -

Tip & Roll

Our ‘Tip & Roll’ bleachers offer a durable solution for low maintenance spectator seating. Constructed from our Hot-dip Galvanized steel under structure, clear anodized seat planking, mill finished double foot board planking and 100 mm riser restriction options.

Heavy duty swivel caster wheels with rubber treads are installed onto the rear column this allows for ease of transport and storage. Each bleacher has been designed to exceed all requirements outlined in both the Ontario Building Code and the National Building Code.

Our Tip and Roll bleachers are available in 2, 3, and 4 rows. All tip and roll bleachers come in various lengths. Please contact our experts to get the best fit for your space.

For sizing options contact us.

×
St. Jean de Brebeuf C.S.S. 10R42AP(8) 014
10 Row -

10 Row

Our 10 row bleachers provide a multi-tiered bleacher system which makes for the maximum use of space available. These are built using our Hot-dip Galvanized under structures, and are designed to exceed all Canadian Building Code requirements.

For sizing options contact us!

×
12 Row  
11-20 Row Bleachers -
15 Row  
11-20 Row Bleachers -
20 Row  
11-20 Row Bleachers -

11-20 Row Bleachers

Our 11-20 row bleachers come in various lengths and sizes. Each design is manufactured to provide the most out of the space provided. Our experts can supply you with the knowledge to incorporate the best model into your space.

×
Frame Kits  
Frame Kits - 2, 3, 4 & 5 Row Kits
TRALERABLE BLEACHER FRAME KIT  
Frame Kits -

Frame Kits

Bleacher frame kits provide an economical spectator seating solution. Each kit includes the Hot-dip Galvanized steel under structure, hardware, and written instructions required to assemble the bleacher unit.

All our bleacher frame kits are available in various lengths to suit all locations.

×
CB27  
Channel Beam -
 
Channel Beam -

Channel Beam

Our CB27 bleacher is 4 rows high × 5 meters long. By design this bleacher does not require a “guard” rail as the rear seat height does not exceed 1/2m. This bleacher is available in any length to meet with your specific needs.

Contact us today to submit a request.

×
Guard Rails  
Guard Rail -
 
Guard Rail -
 
Guard Rail -

Guard Rail

Guard rail systems are available to be attached to any of our standard 4-5 row bleachers. Three options for our guard rails are: vertical picket, chain link or our horizontal rails. All guard rail systems provide support and durability to your bleacher product.

Contact us today to submit a request.

×

Fold and Go

FOLD AND GO bleachers are manufactured to offer the ultimate in transportability. These units boast two hundred comfortably sized seats and are equipped with a complete highway towing package. The unit moves quickly throughout your community and can be rented out – eliminating the cost and effort of moving existing seating.  The FOLD AND GO bleacher is a fully engineered seating package manufactured to exceed all design and code requirements ensuring full insurability.

Contact us today with your requirements.

Options

Fold & Go

Features:

  • Fast, one-person setup –hydraulically operated. Comfortably expanded seat spacing – double footboards and access aisles meet all code guidelines.
  • Anodized Aluminum seating and Galvanized Steel provides a lifetime finish.
  • Highway towable with dual axle suspension, four wheel breaks, signal lights, towing hitch and safely chains.
  • Jacks for setup on uneven area.
×

Grandstands

Our grandstands provide the highest quality, and with our expert opinions we will provide you with a smooth and easy process. We offer free consultation, specifications, cost estimation and samples. Applications may vary according to specific needs.

Options
Grandstands  
Grandstands -
 
Grandstands -
 
Grandstands -
 
Grandstands -

Grandstands

We are committed to maintaining the highest standards in design and manufacturing of the finest quality seating. We have major installations across Canada. We look forward to assisting you in the early stages of your project.

Contact us today for a consultation.

×
Aisles  
Accessories -
Backrests  
Accessories -
Guard Rails  
Accessories -
Railing  
Accessories -
Ramps  
Accessories -
Riserboards  
Accessories -
Seats  
Accessories -
Stairs  
Accessories -

Accessories

Specific bleacher models have the option for accessories to elevate your bleachers. Our accessories include: backrests, aisle’s, guard rails, stairs, railings, ramps, seats, and riser boards. We also offer a quick assembly model bleacher.

Contact us today for a consultation.

×

Picnic Tables

Here at the Bleacherguys, we offer various unique designs of picnic tables. All of our frames are Hot-dip Galvanized after fabrication.

Quality is our number one priority, by focusing on creating picnic tables that are durable, stable and functional we are offering a competitive product that will suit your every need. Contact us today with your requirements.

Options
Frame Kits  
LT6-Heavy Duty Two Sided -
Pressure Treated  
LT6-Heavy Duty Two Sided -
Cedar  
LT6-Heavy Duty Two Sided -
Perforated Steel  
LT6-Heavy Duty Two Sided -
Recycled Plastic  
LT6-Heavy Duty Two Sided -
Aluminum Plank  
LT6-Heavy Duty Two Sided -

LT6-Heavy Duty Two Sided

Our LT6-Heavy Duty two sided tables are available with a variety of different framing and planking length options. Planking can be supplied by us or bought separately from your frame unit. The LT6-Heavy Duty is designed to be non-tippable unit with a highly durable Hot-dip Galvanized under structure.

×
LT6-Accessible Table
LT6-AODA Table -

LT6-AODA Table

Here at the Bleacherguys we are pleased to have a variety of accessible products and seating options to fit everyones needs.

Construction
Frame:
-2” schedule 40 pipe (2.375” O.D) continuously bent
-Top support members are 3”× 2”× 3/16” steel angle
-Seat support members are 2”×1 1/2”×3/16” steel angle
-Picnic table end frames diagonally supported by 1 1/2”×1/2”×1/8” steel channel
-Table top centre plate members 3/16” flat bar

Available Finish: Hot-dip Galvanized after fabrication (standard) or Powder coat finish
Hardware: Hot-dip Galvanized hardware set
Available Lengths: 6ft long, 8ft long
Available Planking: Kiln dried, pressure treated, cedar, clear anodized Alum-A-Plank, recycled plastic

×
ANG6 - Light Duty Two Sided
ANG6-Light Duty Two Sided -

ANG6-Light Duty Two Sided

Our ANG6-Light Duty two sided picnic tables provide a cost efficient, durable and corrosion resistant metal frame structure. Two purchasing options are available: Frame kit structure (customer supplies planking material), or purchase of the complete picnic table with planking.

Construction
Frame: 2” × 2” × 3/16” Hot rolled steel angle construction
Available Finish: Hot-dip Galvanized after fabrication (standard) or Powder coat finish
Hardware: Hot-dip Galvanized hardware set
Available Lengths: 6ft long, 7ft long, 8ft long, 10ft long, 12ft long
Available Planking: Kiln dried, pressure treated, cedar, clear anodized Alum-A-Plank, recycled plastic

×
LT 4×4-HEAVY DUTY FOUR SIDED
LT 4×4-HEAVY DUTY FOUR SIDED -

LT 4×4-HEAVY DUTY FOUR SIDED

Our 4×4 LT table provides an affordable solution for indoor and outdoor seating. With the hot dipped galvanized structure this table is durable and maintenance free.

Construction
Frame: 2” – 3/8” sch 40 pipe construction
Available Finish: Hot-dip Galvanized after fabrication (standard)
Available Planking: Pressure treated, cedar, Alum-A-Plank and/or recycled plastic

×

Player Benches

We offer player benches that are available in any length, with or without backrests. Our benches are Clear Anodized Extruded Aluminum Plank construction with Hot-dip Galvanized legs. Either portable or permanent our player benches are designed for your requirements. Contact us today with your requirements.

Options
DIRECT BURIAL ALUMINUM PLAYER BENCH  
Direct Burial -
 
Direct Burial -

Direct Burial

Our heavy duty direct burial aluminum players benches are constructed from quality material to ensure durability and longgevity of the product. Benches are available in various common legs and are also available in custom lengths.

Construction
Legs:
– 2” schedule 40 (2.375” O.D.) pipe
– 2” × 1 1/2” × 3/16” steel angle
– Hot-dip Galvanized after fabrication

Seat Planking: Nominal 2” × 10” clear anodized aluminum planking
Back Rest (optional)
– Nominal 2” × 6” curved clear anodized aluminum planking
– Nominal 2” × 10” clear anodized aluminum planking
– Clear anodized aluminum back rest supports

Hardware: Hot-dip Galvanized hardware set

×
Surface Mount Pedastel  
Surface Mount Pedestal -
 
Surface Mount Pedestal -

Surface Mount Pedestal

Our surface mount pedestal aluminum players benches are constructed from quality material to ensure durability and longevity of the product. These benches are available in various lengths.

Construction
Legs:
– 2” schedule 40 (2.375” O.D.) pipe
– 2” × 1 1/2” × 3/16” steel angle
– Hot-dip Galvanized after fabrication

Seat Planking: Nominal 2” × 10” clear anodized aluminum planking
Back Rest (optional):
– Nominal 2” × 6” curved clear anodized aluminum planking
– Nominal 2” × 10” clear anodized aluminum planking
– Clear anodized aluminum back rest supports
Hardware: Hot-dip Galvanized hardware set

×
Portable Aluminum Players Benches  
Portable Aluminum -
 
Portable Aluminum -

Portable Aluminum

Our portable players benches provide a durable and adaptable solution for outdoor and indoor seating. We provide a variety of sizes as well as custom length options.

Construction
Legs:
– 2” schedule 40 (2.375” O.D.) pipe
– 2” × 1 1/2” × 3/16” steel angle
– Hot-dip Galvanized after fabrication

Seat Planking: Nominal 2” × 10” clear anodized aluminum planking
Back Rest (optional):
– Nominal 2” × 6” curved clear anodized aluminum planking
– Nominal 2” × 10” clear anodized aluminum planking
– Clear anodized aluminum back rest supports
Hardware: Hot-dip Galvanized hardware set

×

Park Benches

Our park benches come in both portable and permanent designs. Our designs come various sizes. While sizes vary all bench legs are solid and durable. Our clients then supply themselves with their chosen lumber to complete the bench.

All our frames are Hot-dip Galvanized and are designed with your needs in mind. Contact us today with your requirements.

Options
Direct Burial
Direct Burial -

Direct Burial

Our direct burial park bench design fastens the bench into the ground. The overall benefit of the direct burial design is to reduce the risk of theft. This bench is available in many planking materials and sizes.

Construction: Benches can accept 2”×6“, 2”×8“, 2”×12“
Legs: 2- 3/8” sch 40 pipe construction
Available Finish: Hot-dip Galvanized after fabrication
Planking: Pressure treated, cedar, Alum-A-Plank and/or recycled plastic seats

×
Surface Mount
Surface Mount -

Surface Mount

Our surface mount park bench design uses a anchoring system to allow the bench to be fastened to the ground below the bench. Various planking options and sizes are available.

Construction: Benches can accept 2”×6“, 2”×8“, 2”×12“
Legs: 2- 3/8” sch 40 pipe construction
Available Finish: Hot-dip Galvanized after fabrication
Planking: Pressure treated, cedar, Alum-A-Plank and/or recycled plastic seats

×
Portable
Portable -

Portable

Our portable bench design offers a comfortable and adaptable seating solution. Being portable allows the bench to be moved for alternate uses. This design comes in various planking options that vary in size and material.

Construction: Benches can accept 2”×6“, 2”×8“, 2”×12“
Legs: 2- 3/8” sch 40 pipe construction
Available Finish: Hot-dip Galvanized after fabrication
Planking: Pressure treated, cedar, Alum-A-Plank and/or recycled plastic seats

×
Direct Burial with Bolt-On Armrest
Bolt On Armrest -

Bolt On Armrest

Our bolt on arm rests are available as an accessory on all of our park bench designs. These arm rests provide comfortable seating solution giving the ability for a more relaxing sitting position.

Contact us to submit a request today

×

AODA Compliant Products

Finding seating products that suit everyone’s needs isn’t easy. Here at the Bleacherguys we offer a variety of AODA compliant products that fit the needs and standards of every customer.

All of our AODA products are built to the standards of the National and Provincial building codes. Contact us today with your requirements.

Options
LT6-ACCESSIBLE TABLE
Accessible Picnic Tables -

Accessible Picnic Tables

Our Accessible picnic tables provides a non-tippable, non-trip, walk through, AODA compliant portable accessible picnic table design.

Construction
Frame:
-2” schedule 40 pipe (2.375” O.D) continuously bent
-Top support members are 3”× 2”× 3/16” steel angle
-Seat support members are 2”×1 1/2”×3/16” steel angle
-Picnic table end frames diagonally supported by 1 1/2”×1/2”×1/8” steel channel
-Table top centre plate members 3/16” flat bar

Available Finish: Hot-dip Galvanized after fabrication (standard) or Powder coat finish
Hardware: Hot-dip Galvanized hardware set
Available Lengths: 6ft long, 8ft long
Available Planking: Kiln dried, pressure treated, cedar, clear anodized Alum-A-Plank, recycled plastic

×
Wheel Chair Ramps  
Wheel Chair Ramps -
 
Wheel Chair Ramps -

Wheel Chair Ramps

Usually installed for higher row bleachers and grandstands our wheel chair ramps open up spectator seating for everyone. Our ramps are designed to fit any standard wheel chair, making the ramps versatile and effective.

For more information or to submit a request contact us today.

×
Wheelchair Spaces  
Wheel Chair Spaces -
 
Wheel Chair Spaces -

Wheel Chair Spaces

Our wheel chair spaces can be applied to one of our non-elevated bleachers allowing for simple “Bump Outs” in the first row. This allows for a “Barrier Free” space required by the National and Provincial building codes.

For more information or to submit a request contact us today.

×

Press Box Structures

Here at the Bleacherguys we offer press box structures to accompany your grandstand systems. Our custom press box structures are hot dipped galvanized and comply to Part 3 of the Ontario Building Code.

Elevate your grandstand unit with one of our press box structures today! For more information contact us.

Options
 
Press Boxes -
 
Press Boxes -
 
Press Boxes -
 
Press Boxes -

Press Boxes

Our press box structures are an integral part of the design process when contemplating bleacher systems. To ensure quality of our structures all hardware is Hot-dip Galvanized and designed to meet your needs.

There are many custom options when it comes to press boxes and our team can help you find the best fit for your purchase.

Contact us today for more specifications.

×

Goals & Nets

The Bleacherguys are proud to be the Ontario distributor for Scoremaster. With 25 years of experience building sports goals they put safety at their highest standard.

Scoremaster was the first manufacturer of goal equipment to address the potential problems and safety issues within the industry. To this date through extensive product testing and proven designs safety is Scoremasters trademark.